Please note that our offices will be closed for the winter holidays from 5pm on December 23nd, 2024 to January 3rd, 2025 inclusively. Our offices will re-open on Monday January 6th.
- Enables up to 64 channels of data acquisition
- Complete synchronization between Leader board and all Follower boards
- SyncBoard 9416 copies all clock and trigger signals and supplies them to all connected Follower boards
- Allows the use of variable frequency clocks
ATS9416: SyncBoard 4x
If your application requires more than 16 channels for data acquisition, you can synchronize multiple digitizers on all platforms using a Leader/Follower SyncBoard 9416. SyncBoard 9416 is a mezzanine board that connects to the Leader/Follower connector along the top edge of the ATS9416 and sits parallel to the motherboard.
SyncBoard-9416 4x allows a 2-, 3-, or 4-board Leader/Follower system with single-slot spacing for up to 64 channels of data acquisition.
If you require 2-slot spacing between ATS9416 cards to support a motherboard that spaces out the on-board x8 or x16 slots by two slots, use the SyncBoard 9416 4x-W.
"
Complete synchronization between Leader board and all Follower boards
The Leader board’s clock and trigger signals are copied by the SyncBoard 9416 and supplied to all the Follower boards. This guarantees complete synchronization between the Leader board and all Follower boards. SyncBoard 9416 allows the use of variable frequency clocks in Leader/Follower configuration. A Leader/Follower system samples all inputs simultaneously and also triggers simultaneously on the same clock edge.
For optimal trigger accuracy, only the Leader board is allowed to trigger the acquisition system.